Command Line Interface Guide

182 omreport storage Commands
omreport Enclosure Status
Table 7-5 describes the syntax for the omreport Enclosure Commands.
Table 7-5. omreport Enclosure Commands
Required Command Levels
(1, 2, 3)
Optional name=value pairs Use
omreport storage
enclosure
Displays property information
for all enclosures attached to the
system.
controller=id
where id is the controller
number
Displays all enclosures
connected to the controller.
controller=id enclosure=
<ENCLOSUREID>
where id is the controller
number and
<ENCLOSUREID> is
the enclosure ID.
Example for SCSI
controllers: controller=0
enclosure=2. Example for
SAS controllers:
controller=0 enclosure=
1:2.
Displays the specified enclosure
and its components.