Command Line Interface Guide
omreport storage Commands 181
omreport Controller Status
Table 7-4 describes the syntax for the omreport Controller Commands.
Table 7-4. omreport Controller Commands
Required Command
Levels (1, 2, 3)
Optional name=value pairs Use
omreport storage
controller
Displays property information
for all controllers attached to
the system.
controller=id
where id is the controller
number. For example:
controller=0
Displays the specified
controller and all attached
components such as
enclosures, virtual disks,
physical disks, and so on.
controller=id
info=foreignkeyids
Displays the locked foreign
configuration information for
import or clear operations.
controller=id
info=pdslotreport
Displays the empty and
occupied slot details of
enclosures in the controller.
NOTE: This command is not
supported on Blackplane,
SCSI, and SWRAID controllers.