Command Line Interface Guide

180 omreport storage Commands
omreport Virtual Disk Status
Table 7-3 describes the syntax for the omreport Virtual Disk Commands.
Table 7-3. omreport Virtual Disk Commands
Required Command
Levels (1, 2, 3)
Optional name=value pairs Use
omreport storage vdisk Displays property information
for all virtual disks on all
controllers.
controller=id
where id is the controller
number. For example:
controller=0.
Displays all virtual disks on
the specified controller.
controller=id vdisk=id
where id is the controller
number and the virtual disk
number. For example:
controller=0 vdisk=1.
Displays the specified virtual
disk on the controller.