Command Line Interface Guide

omreport storage Commands 179
cachecade=id
where id is the
cachecade number.
For example:
cachecade=1
Displays all physical disks
included in the specified
cachecade on the
controller.
NOTE: The cachecade
feature will be available
from first half of calendar
year 2011.
connector=id
where id is the connector
number. For example:
connector=1
Displays all physical disks
attached to the specified
connector on the
controller.
pdisk=connectorID :
targetID | connectorID :
enclosureID : slotID
where
connectorID:targetID is
the connector number
and the physical disk
number and
connectorID:enclosureID:s
lotID is the connector
number, enclosure
number, and slot number.
For example: pdisk=0:2
or pdisk=0:1:2
Displays the specified
physical disk on the
specified connector on the
controller.
Table 7-2. omreport Physical Disk Commands
(continued)
Required Command Levels (1, 2, 3)
and name=value pair
Optional name=value pairs Use