Command Line Interface Guide

170 omconfig system or servermodule
Adding System Information
System information includes the primary user of the system, the phone
number for the primary user, and the location of the system. Table 5-11 shows
the valid parameters for adding system information.
Example Command for Adding System Information
To provide a value for a system parameter, type a command of the form:
omconfig system assetinfo info=system <name=value pair 2> or
omconfig servermodule assetinfo info=system <name=value pair 2>.
For example, type:
omconfig system assetinfo info=system location=
firstfloor
or
omconfig servermodule assetinfo info=system
location=firstfloor
The following message appears:
Asset information set successfully.
Table 5-11. omconfig system assetinfo info=system/omconfig servermodule
assetinfo info=system
Command
Level 1
Command
Level 2
Command
Level 3
Name=
Value Pair 1
Name= Value Pair 2 Description
omconfig
system/server
module
assetinfo
info=
system
location=<text> Location of the
system.
primaryphone=
<n>
Phone number of
the primary user
of the system.
primaryuser=
<user>
Primary user of
the system.