Command Line Interface Guide

136 omconfig: Managing Components
Table 4-20 shows the name=value pairs you can use with this command.
Table 4-20. Configuring Webserver Preferences
For example, to set the URL launch point use the following command:
omconfig preferences webserver attribute=seturl
host=<name, ip, fqdn> port=<number>
The host input must contain a valid IPv4 or IPv6 address, or a valid
hostname.
To set the signing algorithm value, use the following command:
omconfig preferences webserver attribute=
signalgorithm algorithm<MD5|SHA1|SHA256|SHA512>
For more information on configuring Web server preferences, see the Dell
OpenManage IT Assistant User’s Guide.
name=value pair 1 name=value pair 2 Description
attribute=
sslencryption
setting=autonegotiate
| 128bitorhigher
autonegotiate: Sets the encryption
levels automatically based on your web
browser settings.
128bitorhigher: Sets the encryption
levels to 128-bit or higher.
attribute=seturl host=<string> port=
<value>
Enables you to configure the URL
launch point in the Server
Administrator Web server
environment.
attribute=
signalgorithm
algorithm=MD5 |
SHA1 | SHA256 |
SHA512
MD5: Sets the key signing algorithm
to MD5.
SHA1: Sets the key signing algorithm
to SHA1.
SHA256: Sets the key signing
algorithm to SHA256.
SHA512: Sets the key signing
algorithm to SHA512.