Command Line Interface Guide

omconfig: Managing Components 119
dnssourcev6=static | auto static: DNS source is set to static.
auto: DNS source is set to auto.
config=nic
(continued)
encryptkey=text
confirmencryptkey=text
text: Text used for encryption and
confirmation of encryption.
NOTE: The text option is supported only
on PowerEdge x9xx systems.
gateway=Gateway Gateway: Sets a gateway address if you
have selected static as the IP address
source for the BMC LAN interface.
gatewayv6=<value> Validates the IPv6 gateway.
enablenic=true | false true: Enables DRAC NIC.
false: Disables DRAC NIC
NOTE: The enablenic option is supported
on PowerEdge x9xx systems that have
DRAC 5 installed.
ipaddress=ip ip: Sets the IP address if you have
selected static as the IP address source
for the BMC LAN interface.
ipaddressv6=<IPv6
address>
Validates the IPv6 address for
configuration.
ipsource=static | dhcp |
systemsoftware
static: Static if the IP address of the
BMC LAN interface is a fixed, assigned
IP address.
dhcp: DHCP if the source of the
IP address of the BMC LAN interface is
the dynamic host
configuration protocol.
systemsoftware: System software if the
source of the IP address of the BMC
LAN interface is from the system
software.
NOTE: Not all commands may be
supported on your system.
Table 4-11. omconfig chassis remoteaccess/omconfig mainsystem
remoteaccess
(continued)
name=value pair 1
config=
name=value pair 2 Description