Users Guide

Server Administrator Services 81
Broadcom - BACS. If one of the physical NICs fails, the IP address remains
accessible because it is bound to the logical NIC rather than to a single
physical NIC. If Team Interface is configured, the detailed team properties
are displayed. The relation between physical NICs and Team Interface and
vice-versa is also reported, if these physical NICs are members of the Team
Interface.
NOTE: NIC teaming information is not available on ESX and ESXi systems.
The Network object action window can have the following tab, depending on
the user's group privileges: Properties.
Properties
Subtab: Information
Under the Properties tab, you can view information about the physical NIC
interfaces and also the team interfaces installed on your system.
NOTE: In the IPv6 Addresses section, Server Administrator displays only two
addresses, in addition to the link-local address.
Ports
Click the Ports object to manage your system's external ports.
Server Administrator monitors the status of each external port present in
your system. The Ports object action window can have the following tab,
depending on the user's group privileges: Properties.
Properties
Subtab: Information
Under the Properties tab, you can view information about your system's
internal and external ports.
Power Management
NOTE: Power Management features are only available for PowerEdge systems
that have hot-swappable power supplies and not systems that have a fixed, non-
redundant power supply installed. For more information, go to delltechcenter.com
and search for Dell Servers Capable of Power Monitoring.
book.book Page 81 Monday, March 14, 2011 2:40 PM