Users Guide

78 Server Administrator Services
Properties
Subtab: Fan Probes
Under the Properties tab, you can:
• View the current readings for your system's fan probes and configure
minimum and maximum values for fan probe warning threshold.
NOTE: Some fan probe fields differ according to the type of firmware your
system has: BMC or ESM. Some threshold values are not editable on
BMC-based systems.
• Select fan control options.
Alert Management
Subtabs: Alert Actions | SNMP Traps
Under the Alert Management tab, you can:
• View current alert actions settings and set the alert actions that you want
to be performed in the event that a fan returns a warning or failure value.
• View current SNMP trap alert thresholds and set the alert threshold levels
for fans. The selected traps are triggered if the system generates a
corresponding event at the selected severity level.
Firmware
Click the Firmware object to manage your system firmware.
Firmware consists of programs or data that have been written to ROM.
Firmware can boot and operate a device. Each controller contains firmware
that helps provide the controller's functionality. The Firmware object
action window can have the following tab, depending on the user's group
privileges: Properties.
Properties
Subtab: Information
Under the Properties tab, you can view your system's firmware information.
Hardware Performance
Click the Hardware Performance object to view the status and cause for the
system’s performance degradation. The Hardware Performance object action
window can have the following tab, depending on the user's group privileges:
Properties.
book.book Page 78 Monday, March 14, 2011 2:40 PM