Users Guide

Working with Remote Access Controller 101
Additional Configuration for iDRAC
You can configure the IPv4 and IPv6 properties using the Additional
Configuration tab. To do this:
1
Click the Modular Enclosure  System/Server Module  Main System
Chassis/Main System
 Remote Access object.
2 Click the Configuration tab.
3 Click Additional Configuration.
4 Configure the IPv4 and IPv6 properties as Enabled or Disabled .
5 Click Apply Changes.
Configuring Remote Access Device Users
Remote access device users can be configured using the Remote Access page.
To access this page:
1
Click the Modular Enclosure  System/Server Module  Main System
Chassis/Main System
 Remote Access object.
2 Click the Users tab.
The
Remote Access Users window displays information about users that
can be configured as BMC/iDRAC users.
3 Click User ID to configure a new or existing BMC/iDRAC user.
The
Remote Access User Configuration window allows you to configure a
specific BMC/iDRAC user.
4 Specify the following general information:
– Select
Enable User to enable the user.
– Enter the name for the user in the
User Name field.
– Select the
Change Password check box.
– Enter a new password in the
New Password field.
– Re-enter the new password in the
Confirm New Password field.
book.book Page 101 Monday, March 14, 2011 2:40 PM