Users Guide

20 Installing Dell OpenManage Server Administrator
4 Run Connect-VIServer and provide the server and other credentials.
5 Log on to the ESXi 5.0 host using supported vSphere CLI of ESXi 5.0 and
create a datastore.
6 Create a folder OM-SrvAdmin-Dell-Web-7.0.0-< buildID >.VIB-ESX50i
on ESXi 5.0 host under
/vmfs/volumes/<datastore_name>
directory.
7 Copy the ESXi 5.0 zip file on ESXi 5.0 host to
/vmfs/volumes/< datastore_name >/OM-SrvAdmin-Dell-Web-7.0.0-
<
build ID >.VIB-ESX50i directory.
8 Unzip the zip file in the above specified directory.
9 Run the following command in Power CLI
Install-VMHostPatch -VMHost 10.94.171.97 -
HostPath /vmfs/volumes/<datastore_name>/OM-
SrvAdmin-Dell-Web-7.0.0-<build ID>.VIB-
ESX50i/cross_oem-dell-openmanage-esxi_7.0-0000-
metadata.zip
10
Reboot the ESXi 5.0 host.
11 Run the following command to check if OpenManage is installed
successfully on the host.
esxcli software vib list|grep -i open
OpenManage is displayed.
Installing the Server Administrator Web Server
Install the Server Administrator Web Server separately on a management
station. Download the Web Server from support.dell.com. For the
installation procedure, see the Dell OpenManage Server Administrator
Installation guide available on the Dell Systems Management Tools and
Documentation DVD or at
support.dell.com/support/edocs/software/omswrels/index.htm.
NOTE: Make sure that you install only Server Administrator Web Server version
6.5.
esxi5_techsheet.book Page 20 Tuesday, January 24, 2012 3:25 PM