Users Guide

34 Setup and Administration
Administrator SNMP Configuration page under Preferences or the Server
Administrator command line interface (CLI) to enable or disable SNMP Set
Operations. For more information on enabling or disabling SNMP Set operations in
Server Administrator, see the Dell OpenManage Server Administrator User’s Guide
or the Dell OpenManage Server Administrator Command Line Interface User's Guide.
Configuring Your System to Send SNMP Traps to a Management Station
The Dell OpenManage software generates SNMP traps in response to
changes in the status of sensors and other monitored parameters. You must
configure one or more trap destinations on the Dell OpenManage software
system for SNMP traps to be sent to a management station.
1
Open the Computer Management window.
2 Expand the Computer Management icon in the window, if necessary.
3 Expand the Services and Applications icon and click Services .
4 Scroll down the list of services to SNMP Service , right-click SNMP
Service
, and click Properties .
The
SNMP Service Properties window appears.
5 Click the Traps tab to add a community for traps or to add a trap
destination for a trap community.
a To add a community for traps, type the community name in the
Community Name box and click Add to list , which is located next to
the
Community Name box.
b To add a trap destination for a trap community, select the community
name from the
Community Name drop-down box and click Add
under the
Trap Destinations box.
The
SNMP Service Configuration window appears.
c Type the trap destination and click Add .
The
SNMP Service Properties window appears.
6 Click OK to save the changes.