Users Guide

Setup and Administration 33
c To change a community name, select a community name in the
Accepted Community Names list and click Edit .
The
SNMP Service Configuration window appears.
d Edit the community name of the management station in the
Community Name text box, and click OK .
The
SNMP Service Properties window appears .
6 Click OK to save the changes.
Enabling SNMP Set Operations
Enable SNMP Set operations on the system running Dell OpenManage
software, to change Dell OpenManage software attributes using IT Assistant.
To enable remote shutdown of a system from IT Assistant, enable SNMP
Set operations.
NOTE: Rebooting your system for change management functionality does not
require SNMP Set operations.
1 Open the Computer Management window.
2 Expand the Computer Management icon in the window, if necessary.
3 Expand the Services and Applications icon, and click Services .
4 Scroll down the list of services to SNMP Service , right-click SNMP
Service
, and click Properties.
The SNMP Service Properties window appears.
5 Click the Security tab to change the access rights for a community.
6 Select a community name in the Accepted Community Names list,
and then click
Edit .
The
SNMP Service Configuration window appears.
7 Set the Community Rights to READ WRITE or READ CREATE ,
and click
OK .
The
SNMP Service Properties window appears.
8 Click OK to save the changes.
NOTE: In Dell OpenManage Server Administrator version 5.3 and later, SNMP Set
Operations are disabled by default in Server Administrator. Server Administrator
provides support to enable or disable SNMP Set operations. You can use the Server