User's Manual


Enclosure Tasks
To execute a drop-down menu enclosure task:

1. Expand the Storage tree object to display the controller objects.

2. Expand a controller object.

3. Expand a Connector object.

4. Select the enclosure object.

5. Select the Information/Configuration subtab.

6. Select a task from the Available Tasks drop-down menu.

7. Click Execute.

Drop-down Menu Enclosure Tasks:
l Enable Alarm (Enclosure)
l Disable Alarm (Enclosure)
l Set Asset Data
l Blink
l Set Temperature Probe Values

Available Reports
To view a report:

1. Expand the Storage tree object to display the controller objects.

2. Expand a controller object.

3. Expand a Connector object.

4. Select the enclosure object.

5. Select the Information/Configuration subtab.

6. Select a report from the Select Report drop-down menu.

7. Click Execute.

Available Reports
l View Slot Occupancy Report

Enable Alarm (Enclosure)
Asset Name
This property displays the name assigned to the enclosure. You can change this property using the Set Asset Data task.
Backplane Part
Number
This property displays the part number of the enclosure's backplane.
SAS Address
This property displays the SAS address of the SAS backplane.
Split Bus Part
Number
This property displays the part number of the enclosure's split bus module. A split bus is indicated by a single triangle symbol on the back
of the enclosure.
Enclosure Part
Number
This property displays the part number of the enclosure.
Enclosure Alarm
This property displays whether the enclosure's alarm is enabled or disabled.