Owner's Manual

52 omreport: Viewing System Status
Connector Type refers to the type of plug or cable and plug that connects
two devices together, in this case, the type of connector that attaches an
external device to a system. There are many connector types, each designed
to connect a different device type to a system. Examples include DB-9 Male,
AT, Access Bus, PS/2, and so on.
Maximum Speed is the port speed. Port speed refers to the data transmission
rate of an input/output channel, measured in numbers of bits per second.
Serial ports usually have a maximum speed of 115 Kbps and USB version 1.x
ports have a maximum speed of 12 Kbps.
omreport chassis processors/omreport mainsystem processors
Use the omreport chassis processors or omreport mainsystem processors
command to view properties of your system’s processors.
Values display for the following fields: Index, Status, Connector Name,
Processor Brand, Processor Version, Current Speed, State, and Core Count.
Index is the processor number.
Status is the current status of the processor.
Connector Name is the name or number of the device that occupies the
processor slot in the system.
Processor Brand is the type of processor made by a manufacturer such as
Intel Itanium, Intel Pentium III, Intel Xeon, or AMD Opteron.
Processor Version is the model and stepping number of the processor.
Current Speed is the actual processor speed in MegaHertz at system boot
time.
State is whether the processor slot is enabled or disabled.
Core Count is the number of processors integrated into one chip.
Capabilities and Cache Properties of a Specific Processor
To view the cache properties of a processor on a given connector, type:
omreport chassis processors index=n
or
omreport mainsystem processors index=n