Owner's Manual

omreport: Viewing System Status 51
To view Team interface properties, type:
omreport chassis nics config=team index=n
or
omreport mainsystem nics config=team index=n
NOTE: This command is applicable only if Team interface is configured in the
system. Team interface can be configured using NIC vendor tools, such as
Broadcom.
The index parameter is optional. If you do not specify the index, Server
Administrator displays details of all the Team interfaces on your system and
the values for the following fields: Index (NIC card number), Interface
Name, Vendor, Description, and Redundancy Status.
If you specify the index, Server Administrator displays the Team interface
details for the specific NIC and the values for the following fields: Team
Interface, Interface, IPv4 Addresses, IPv6 Addresses, Team Interface
Receive Statistics, Team Interface Transmit Statistics, Interface Receive
Statistics, and Interface Transmit Statistics.
omreport chassis ports/omreport mainsystem ports
Use the omreport chassis ports or omreport mainsystem ports command to
view properties of your system’s parallel and serial ports.
Values display for the following fields: Port Type, External Name,
Base I/O Address, IRQ Level, Connector Type, and Maximum Speed.
Port Type is the detailed type of each system port, from the more general
serial, parallel, and USB ports to the names of ports by device type connected
to it, for example, pointing device or keyboard.
External Name is the name of the port, such as serial or parallel, USB, mouse,
keyboard, and so on.
Base I/O Address is the starting I/O address expressed in hexadecimal.
IRQ Level is a hardware interrupt on a system. The hardware interrupt
signals the system's CPU that an event has started or ended in a peripheral
component such as a modem or printer. When communicated over a
peripheral component interconnect card, the IRQ level is a standard way
to identify the type of device that is sending the interrupt request.