Owner's Manual

256 omconfig storage Commands
Complete Syntax
omconfig storage connector action=rescan
controller=id connector=id
where id is the controller ID and the connector ID as reported by the
omreport command. To obtain these values, type omreport storage controller
to display the controller IDs and then type omreport storage connector
controller=ID to display the IDs for the connectors attached to the
controller.
Example Syntax
To rescan connector 2 on controller 1, type:
omconfig storage connector action=rescan
controller=1 connector=2
omconfig Cachecade Commands
The following sections provide the omconfig command syntax required to
execute cachecade tasks.
NOTE: The cachecade feature will be available from first half of calendar year
2011.
omconfig Blink Cachecade
Use the following omconfig command syntax to blink the physical disks
included in a cachecade.
Table 8-14. omconfig Cachecade Commands
Required Command Levels (1, 2, 3) Optional name=value pairs
omconfig storage cachecade
action=blink controller=id cachecade=id
action=unblink controller=id cachecade=id
action=deletecachecade controller=id cachecade=id
[force=yes]
action=resize controller=id cachecade=id pdisk=
<PDISKID>
action=rename controller=id cachecade=id name=
<string>