Owner's Manual

218 omconfig storage Commands
omconfig Rescan Controller
Use the following omconfig command syntax to rescan a controller.
See Dell OpenManage Online Help for more information about Rescan
Controller.
Complete Syntax
omconfig storage controller action=rescan
controller=id
where id is the controller ID as reported by the omreport storage controller
command.
action=enablelkm controller=id keyid=<keyid> passphrase=
<passphrase string> [escrow=yes] [filepath=<Absolute path to
the escrow file>]
NOTE: If you set escrow=yes, you should specify the escrow file
path.
action=switchtolkm controller=id keyid=<keyid> passphrase=
<passphrase string> [escrow=yes] [filepath=<Absolute path to
the escrow file>]
NOTE: If you set escrow=yes, you should specify the escrow file
path.
action=rekeylkm controller=id
action=switchtodkm controller=id keyid=<keyid>
lkmpassphrase=<LKM passphrase string>
NOTE: The DKM feature will be available from first half of calendar
year 2011.
action=enabledkm controller=id
action=rekeydkm controller=id
action=unlockdkmforeignconfig controller=id
Table 8-4. omconfig Controller Commands
(continued)
Required Command
Levels (1, 2, 3)
Optional name=value pairs