Owner's Manual

216 omconfig storage Commands
Table 8-4. omconfig Controller Commands
Required Command
Levels (1, 2, 3)
Optional name=value pairs
omconfig storage
controller
action=rescan controller=id
action=enablealarm controller=id
action=disablealarm controller=id
action=quietalarm controller=id
action=testalarm controller=id
action=resetconfig controller=id [force=yes]
action=createvdisk controller=id raid=<c| r0| r1| r1c| r5|r6|
r10| r50|r60> size=<number | b | m |g |max | min> pdisk=
<PDISKID> [stripesize=< 2kb| 4kb| 8kb| 16kb| 32kb| 64kb|
128kb | 256kb | 512kb | 1mb >] [cachepolicy=<d | c>]
[readpolicy=<ra| nra| ara| rc| nrc>] [writepolicy=<wb | wt |
wc | nwc | fwb>] [diskcachepolicy=<disabled | enabled>]
[name=<string>] [spanlength=<n>] | [secureflag=yes]
NOTE: For RAID 10 on SAS controllers with firmware version 6.1 and
later, spanlength is an optional parameter (default=2).
action=setrebuildrate controller=id rate=<0 to 100>
action=setchangecontrollerproperties controller=<id>
[bgirate=<rate>][reconstructrate=
<rate>][checkconsistencyrate=<rate>][rebuildrate=
<rate>][clearredundantpath=
clear][abortcheckconsistencyonerror=
<enabled/disabled>][loadbalance=
<auto/disabled>][allowrevertibilehotspareandreplacemember=
enabled/disabled] [autoreplacememberonpredictivefailure=
<enabled/disabled>][persistenthotspare=
enabled/disabled]rate=<0 to 100>
action=discardpreservedcache controller=id
forcepreservedcachediscard=<enabled/disabled>
action=createsecuritykey controller=id keyid=<keyid>
passphrase=<passphrase string> [escrow=yes] [filepath=
<Absolute path to the escrow file>]
NOTE: If you set escrow=yes, you should specify the escrow file
path.