User's Manual

68 omreport: Viewing System Status Using the Instrumentation Service
omreport system pedestinations/omreport servermodule pedestinations
Use the omreport system pedestinations or omreport servermodule
pedestinations command to view destinations where alerts for platform
events are configured to be sent. Depending on the number of destinations
displayed, you can configure a separate IP address for each destination
address.
Ty p e :
omreport system pedestinations
or
omreport servermodule pedestinations
The output of the omreport system pedestinations or omreport
servermodule pedestinations command lists each of the valid parameters.
NOTE: The actual number of destinations that can be configured on your system
may differ.
Table 3-7 shows the available settings.
Table 3-7. Settings for the omreport system pedestinations/omreport servermodule
pedestinations
Output Attributes Description
Destination
List
Destination Number:
Destination1
Destination IP Address:
101.102.103.104
destination 1: Displays the first
destination.
101.102.103.104: IP address of the first
destination.
Destination Number:
Destination 2
Destination IP Address:
110.120.130.140
destination 2: Displays the second
destination.
110.120.130.140: IP address of the
second destination.