User's Manual

omreport: Viewing System Status Using the Instrumentation Service 43
To view all available boot devices, alias names, and boot order sequences,
type:
omreport chassis biossetup attribute=bootorder
NOTE: On Linux systems, user/user groups upgraded to
administrator/administrator groups cannot view the boot order sequence.
omreport chassis currents/omreport mainsystem currents
This command is no longer available through Server Administrator.
omreport chassis removableflashmedia/omreport mainsystem
removableflashmedia
Use the omreport chassis removableflashmedia or omreport mainsystem
removableflashmedia to view the removable flash media details on the
system along with its health status. Type:
omreport chassis removableflashmedia
or
omreport mainsystem removableflashmedia
Server Administrator displays a summary of your system’s removable flash
media information.
Depending on your system’s configuration, you may notice the following
output:
Removable Flash Media Information
Health : Critical
Console Redirection
After Boot
Displays whether console redirection after system reboot is
enabled or disabled.
External Serial
Connector
Displays whether the external serial connector is mapped to
Serial Device 1, Serial Device 2, or a Remote Access Device.
Console Redirection
Failsafe Baud Rate
Displays the setting for console redirection failsafe baud
rate.
Serial Address Select Displays port address for the serial devices.
Table 3-3. BIOS Setup Parameters (continued)
Parameters Description