User's Manual

40 omreport: Viewing System Status Using the Instrumentation Service
NOTE: All the BIOS Setup parameters are not displayed. Only those BIOS setup
properties configured during system boot are displayed.
Table 3-3. BIOS Setup Parameters
Parameters Description
Attribute
Bootsequence Displays the device used to boot the system.
Numlock Displays whether the keypad can be used as number keys.
Embedded Video
Controller
Displays whether the Embedded Video Controller option is
enabled or disabled.
Boot Mode Displays whether the boot mode is configured to BIOS or
Unified Extensible Firmware Interface (UEFI).
Processor C1-E Displays the Processor C1-E status.
CPU Execute Disable Displays whether the Execute Disable (XD) option is
enabled or disabled.
Processor C State
Control
Displays whether the Processor C State Control option is
enabled or disabled.
Processor CMP Displays the number of cores enabled per processor.
User accessible USB
Ports
Displays whether the user-accessible USB port is enabled or
disabled.
CPU Virtualization
Technology
Displays the additional hardware capabilities provided by
Virtualization Technology.
AC Power Recovery
Mode
Displays the system state when input power is restored after
an outage.
Embedded SATA
Controller
Displays whether the embedded SATA controller is set to
ATA mode, RAID mode, or is disabled.
SATA port 0 Displays the state of SATA port 0.
SATA Port 1 Displays the state of SATA port 1.
Dual NIC (1/2) Displays whether NIC 1 and NIC 2 with PXE/iSCSI is
enabled or disabled.
Dual NIC (3/4) Displays whether NIC 3and NIC 4 with PXE/iSCSI is
enabled or disabled.