User's Manual

omreport: Viewing System Status Using the Instrumentation Service 31
leds U, P, A Shows the properties
you have set for
light-emitting diodes
to flash under various
alert conditions.
memory U, P, A Shows properties of
your system's memory
arrays.
nics U, P, A Shows the NIC and
Team interface
properties
ports U, P, A Shows the properties
for your system’s
parallel and serial
ports, such as I/O
address, IRQ level,
connector type, and
maximum speed.
processors U, P, A Shows properties of
your system’s
processors, including
speed, manufacturer,
and processor family.
pwrmanagement U, P, A Shows power
inventory details such
as system idle power,
system maximum
potential power, and
power budget
information.
pwrmonitoring U, P, A Shows properties of
power consumption.
pwrsupplies U, P, A Shows properties of
power supplies.
Table 3-2. Command Level 1, Level 2, and Level 3 for omreport
(continued)
Command
Level 1
Command Level 2 Command
Level 3
User
Privilege
Required
Use