User's Manual

Using the Storage Management Service 233
Complete Syntax
omconfig storage pdisk action=removedeadsegments
controller=id pdisk=<PDISKID>
where id is the controller ID. The <PDISK> variable specifies the
physical disk.
To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage pdisk controller=ID to
display the IDs for the physical disks attached to the controller.
Example Syntax
In this example, you want to remove dead disk segments on physical disk 3 on
connector 0 of controller 1. On a SAS controller, the physical disk resides in
enclosure 2.
Example for SCSI, SATA, and ATA Controllers
To remove dead segments on the physical disk described in this example,
type:
omconfig storage pdisk action=removedeadsegments
controller=1 pdisk=0:3
Example for SAS Controllers
To remove dead segments on the physical disk described in this example,
type:
omconfig storage pdisk action=removedeadsegments
controller=1 pdisk=0:2:3
omconfig Clear Physical Disk
Use the following omconfig command to clear data or a configuration from a
physical disk.
Complete Syntax
omconfig storage pdisk action=clear controller=id
pdisk=<PDISKID>
where id is the controller ID. The <PDISK> variable specifies the physical
disk.