User's Manual

232 Using the Storage Management Service
omconfig Cancel Rebuild Physical Disk
Use the following omconfig command syntax to cancel a rebuild that is in
progress. If you cancel a rebuild, the virtual disk remains in a degraded state.
See the Dell OpenManage Online Help for more information about Cancel
Rebuild Physical Disk.
Complete Syntax
omconfig storage pdisk action=cancelrebuild
controller=id pdisk=<PDISKID>
where id is the controller ID. The <PDISK> variable specifies the
physical disk.
To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage pdisk controller=ID to
display the IDs for the physical disks attached to the controller.
Example Syntax
In this example, you want to cancel the rebuild or physical disk 3 on
connector 0 of controller 1. On a SAS controller, the physical disk resides in
enclosure 2.
Example for SCSI, SATA, and ATA Controllers
To cancel the rebuild of the physical disk described in this example, type:
omconfig storage pdisk action=cancelrebuild
controller=1 pdisk=0:3
Example for SAS Controllers
To cancel the rebuild of the physical disk described in this example, type:
omconfig storage pdisk action=cancelrebuild
controller=1 pdisk=0:2:3
omconfig Remove Dead Segments
Use the following omconfig command syntax to recover unusable disk space.
See the Dell OpenManage Online Help for more information about Removing
Dead Segments.