User's Manual

Using the Storage Management Service 229
Example Syntax
In this example, you want to bring physical disk 3 on connector 0 of controller
1 back online. On a SAS controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA Controllers
To bring the physical disk described in this example back online, type:
omconfig storage pdisk action=online controller=1
pdisk=0:3
Example for SAS Controllers
To bring the physical disk described in this example back online, type:
omconfig storage pdisk action=online controller=1
pdisk=0:2:3
omconfig Assign Global Hot Spare
Use the following omconfig command syntax to assign a physical disk as a
global hot spare.
Complete Syntax
omconfig storage pdisk action=assignglobalhotspare
controller=id pdisk=<PDISKID> assign=yes
where id is the controller ID. The <PDISK> variable specifies the
physical disk.
To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage pdisk controller=ID to
display the IDs for the physical disks attached to the controller.
Example Syntax
In this example, you want to assign physical disk 3 on connector 0 of
controller 1 as a global hot spare. On a SAS controller, the physical disk
resides in enclosure 2.
Example for SCSI, SATA, and ATA Controllers
To assign the physical disk described in this example as a global hot spare,
type: