User's Manual

210 Using the Storage Management Service
where id is the controller ID and virtual disk ID as reported by the omreport
command. To obtain these values, type omreport storage controller to
display the controller IDs and then type omreport storage vdisk controller=
ID to display the IDs for the virtual disks attached to the controller.
Example Syntax
To blink the physical disks in virtual disk 4 on controller 1, type:
omconfig storage vdisk action=unblink controller=1
vdisk=4
omconfig Initialize Virtual Disk
Use the following omconfig command syntax to initialize a virtual disk.
Complete Syntax
omconfig storage vdisk action=initialize
controller=id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport
command. To obtain these values, type omreport storage controller to
display the controller IDs and then type omreport storage vdisk controller=
ID to display the IDs for the virtual disks attached to the controller.
Example Syntax
To initialize virtual disk 4 on controller 1, type:
omconfig storage vdisk action=initialize
controller=1 vdisk=4
omconfig Cancel Initialize Virtual Disk
Use the following omconfig command syntax to cancel the initialization of a
virtual disk.
Complete Syntax
omconfig storage vdisk action=cancelinitialize
controller=id vdisk=id