User's Manual

206 Using the Storage Management Service

omconfig Change Controller Properties

Use the following omconfig command to change any or all of the following

controller properties.

Complete Syntax

omconfig storage controller action=

setchangecontrollerproperties controller=<id>

bgirate=<rate> reconstructrate=<rate>

checkconsistencyrate=<rate> rebuildrate=<rate>

clearredundantpath=clear

abortcheckconsistencyonerror=<enabled/disabled>

loadbalance=<auto/disabled>

allowrevertiblehotspareandreplacemember=

autoreplacememberonpredictivefailure=

<enabled/disabled> persistenthotspare=

Example Syntax

To enable allow revertible hot spare and replace member operation, type:

omconfig storage controller action=

setchangecontrollerproperties

allowrevertiblehotspare andreplacemember=enabled

controller=1

omconfig Storage Virtual Disk

Use the following omconfig storage command syntax to replace a physical

disk that is part of a virtual disk with another physical disk.

Complete Syntax

omconfig storage vdisk action=replacememberdisk

controller=id vdisk=id source=<PDISKID>

destination=<PDISKID>

where PDISKID is specified as:

pdisk=connector:enclosureID:portID