User's Manual

Using the Storage Management Service 193
omconfig storage controller action=resetconfig
controller=id force=yes
Example Syntax
To reset the configuration on controller 1, type:
omconfig storage controller action=resetconfig
controller=1
omconfig Create Virtual Disk
The Dell OpenManage Online Help provides additional information about
creating virtual disks.
The omconfig syntax for creating a virtual disk has several parameters.
You must specify the following parameters:
• Controller (controller=id)
• RAID level (raid=<c| r0| r1| r1c| r5|r6| r10| r50|r60>)
• Size (size=<number | max | min>)
Physical disk is specified as either:
For SCSI, SATA, and ATA Controllers
p disk=connector:enclosureID:portID
where connector:enclosureID:portID is the connector number, enclosure
number, and port number.
For example pdisk=0:1:2
For SAS Controllers
pdisk=connector:targetID
where connectorID:targetID is the connector number and the physical disk
number. For example: pdisk=0:2
Storage Management supplies default values for any of the other parameters
that you do not specify.
For creating a secure virtual disk, specify secureflag=yes. Secure virtual disks
can be created only with SED drives.