User's Manual

182 Using the Storage Management Service

omreport Enclosure Slot Occupancy Report

Table 6-13 describes the syntax for the omreport Enclosure Slot Occupancy

Report Commands

Table 6-13. omreport Enclosure Slot Occupancy Report Commands

Required Command Levels

(1, 2, 3) and name=value

pair

Optional name=value pairs Use

omreport storage enclosure Displays property

information for all enclosures

attached to the system.

controller=id enclosure=

info=pdslotreport

where id is the controller

number and

ENCLOSUREID is the

enclosure number.

For example: controller=0

enclosure=2

Displays the empty and

occupied slot details for the

specified enclosure.

NOTE: This command is not

supported on Blackplane,

SCSI, and SWRAID

controllers.