User's Manual

Using the Storage Management Service 175
omreport Battery Status
Table 6-6 describes the syntax for the omreport Battery Commands.
omreport Connector Status
Table 6-7 describes the syntax for the omreport Connector Commands.
Table 6-5. omreport Global Information Commands
Required Command Levels
(1, 2, 3)
Optional name=
value pairs
Use
omreport storage
globalinfo
Displays whether smart thermal shutdown
is enabled or disabled. See the "omconfig
Global Enable Smart Thermal
Shutdown" on page 185 command for
more information.
Displays the hot spare protection policy
that you have set.
See the Dell
OpenManage Server Administrator
Storage Management User’s Guide for
more information on setting hot spare
protection policy.
Table 6-6. omreport Battery Commands
Required Command Levels (1, 2, 3) Optional name=value pairs Use
omreport storage battery Displays all batteries present
on all controllers on the
system. (Some controllers do
not have batteries).
controller=id
where id is the
controller number. For
example: controller=0
Displays the battery on the
specified controller.