User's Manual

174 Using the Storage Management Service
omreport Controller Status
Table 6-4 describes the syntax for the omreport Controller Commands.
omreport Global Information (Smart Thermal Shutdown Status, Hot
Spare Protection Policy)
Table 6-5 describes the syntax for the omreport Global Information
Commands.
Table 6-4. omreport Controller Commands
Required Command
Levels (1, 2, 3)
Optional name=
value pairs
Use
omreport storage
controller
Displays property information for all controllers
attached to the system.
controller=id
where id is the
controller
number. For
example:
controller=0
Displays the specified controller and all
attached components such as enclosures, virtual
disks, physical disks, and so on.
omreport storage
controller
controller=id
info=
foreignkeyids
Displays the locked foreign configuration
information for import or clear operations.
info=
pdslotreport
Displays the empty and occupied slot details of
enclosures in the controller.
NOTE: This command is not supported on
Blackplane, SCSI, and SWRAID controllers.