User's Manual

Introduction 17
• omconfig
• omhelp
• omreport
The omconfig command writes values that you assign to an object's
properties. You can specify values for warning thresholds on components or
prescribe what action your system is to take when a certain warning or failure
event occurs. You can also use the omconfig command to assign specific
values to your system's asset information parameters, such as the purchase
price of the system, the system's asset tag, or the system's location.
The omhelp command displays short text help for CLI commands.
The shorthand equivalent of omhelp is the command for which you want
help followed by -?. For example, to display help for the omreport command,
type one of the following commands:
omhelp omreport
omreport -?
The omreport command produces reports of your system’s management
information.
NOTE: For an overall summary of CLI commands, type omhelp.
Table 1-1 lists the primary CLI commands used by Server Administrator.
This guide contains a section for each primary command.
Table 1-1. CLI Commands and Sections in This Guide
Primary CLI
Command
Section Title Related Sections
omconfig ""omconfig: Managing
Components Using the
Instrumentation Service" on
page 79"
""omconfig system or
servermodule assetinfo: Editing
Cost of Ownership Values" on
page 151"
omhelp ""Using the omhelp Command" on
page 23"
omreport ""omreport: Viewing System Status
Using the Instrumentation Service"
on page 27"