User's Manual

omconfig system or servermodule assetinfo: Editing Cost of Ownership Values 165
Example Command for Adding Support Information
To provide a value for a support parameter, type a command of the form:
omconfig system assetinfo info=support <name=value pair 2> or
omconfig servermodule assetinfo info=support <name=value pair 2>.
For example, type:
omconfig system assetinfo info=support outsourced=
true
or
omconfig servermodule assetinfo info=support
outsourced=true
The following message appears:
Asset information set successfully.
You can type more than one omconfig system assetinfo or omconfig
servermodule assetinfo command at the same time, as long as all the
parameters for name=value pair 2 belong to the same name=value pair 1. For
an example, see "Example Commands for Adding Acquisition Information" on
page 153.
outsourced=true
| false
Whether an external
business entity
provides technical
support or the system
owner's employees
provide technical
support.
type=network |
storage
Whether support is
for network attached
devices or for
storage devices.
Table 5-10. omconfig system assetinfo info=support/omconfig servermodule
assetinfo info=support
(continued)
Command
Level 1
Command
Level 2
Command
Level 3
Name=
Value Pair 1
Name= Value Pair 2 Description