User's Manual

162 omconfig system or servermodule assetinfo: Editing Cost of Ownership Values
Example Command for Adding Owner Information
To provide a value for an owner parameter, type a command of the form:
omconfig system assetinfo info=owner <name=value pair 2> or
omconfig servermodule assetinfo info=owner <name=value pair 2>.
For example, type:
omconfig system assetinfo info=owner type=rented
or
omconfig servermodule assetinfo info=owner type=
rented
The following message appears:
Asset information set successfully.
You can type more than one omconfig system assetinfo or omconfig
servermodule assetinfo command at the same time, as long as all the
parameters for name=value pair 2 belong to the same name=value pair 1.
For an example, see "Example Commands for Adding Acquisition
Information" on page 153.
Adding Service Contract Information
A service contract is an agreement that specifies fees for preventive
maintenance and repair of the system. Table 5-9 shows the valid parameters
for adding contract information.
ownername
=
<business>
Business entity that owns
the system.
type=owned
| leased |
rented
Whether the user of the
system owns, leases, or
rents the system.
Table 5-8. omconfig system assetinfo info=owner/omconfig servermodule
assetinfo info=owner
(continued)
Command
Level 1
Command
Level 2
Command
Level 3
Name= Value
Pair 1
Name= Value
Pair 2
Description