User's Manual

omconfig: Managing Components Using the Instrumentation Service 117
ipsource=static | dhcp |
systemsoftware
static: Static if the IP address of the
BMC LAN interface is a fixed, assigned
IP address.
dhcp: DHCP if the source of the
IP address of the BMC LAN interface is
the dynamic host
configuration protocol.
systemsoftware: System software if the
source of the IP address of the BMC
LAN interface is from the system
software.
NOTE: Not all commands may be
supported on your system.
ipsourcev6=static | auto static: IPv6 address source is set to
static.
auto: IPv6 address source is set to auto.
config=nic
(continued)
privilegelevel=
administrator | operator |
user
administrator: Sets the maximum
privilege level that can be accepted on a
LAN channel to Administrator.
operator: Sets the maximum privilege
level that can be accepted on a
LAN channel to Operator.
user: Sets the maximum privilege level
that can be accepted on a LAN channel
to User.
prefdnsserverv6=
<value>
Validates the preferred DNS server for
configuration.
subnet=Subnet subnet: Sets a subnet mask if you have
selected static as the IP address source
for the BMC LAN interface.
vlanenable=true | false true: Enables the virtual
LAN identification.
false: Disables the virtual
LAN identification.
Table 4-11. omconfig chassis remoteaccess/omconfig mainsystem
remoteaccess
(continued)
name=value pair 1
config=
name=value pair 2 Description