Read me

file:///T|/htdocs/SOFTWARE/svradmin/6.3/en/README/readme.txt[10/26/2012 8:28:05 AM]
several simpler commands. Each command should change only one
setting.
* When running Server Administrator on a system with a Traditional
Chinese operating system, the Server Administrator pages are
displayed in Simplified Chinese. To view the Server Administrator
in English, go to your browser language preference page and
change the language to English.
* Log files saved from Server Administrator are saved in zip
format. For best results, it is recommended to open this zip file
using WinZip. Using the Windows Server 2003 or Windows XP embedded
"Compressed (zipped) Folder" utility is not recommended.
* After configuring BIOS settings on certain systems, a second
reboot may be required for updated BIOS settings to be properly
displayed by Server Administrator.
* If you import an invalid root certificate into Server Administrator
using "Preferences-> General Settings-> Web Server-> X.509
Certificate" and try to log in to Server Administrator after
restarting the Web server, you will see a blank page.
To correct this issue, restore your original "keystore.db" file
before importing a valid root certificate. To restore the
"keystore.db" file, use both the basic operating system commands
and the Server Administrator CLI. Perform the following steps
from your operating system command line:
1. Type:
omconfig system webserver action=stop
2. Locate the "keystore.db.bak" file. The default path is
"C:\program files\dell\SysMgt\iws\config".
3. Copy "keystore.db.bak" to "keystore.db".
4. Type:
omconfig system webserver action=start
* A temperature drop below a minimum failure threshold does
not cause a system reset even if this alert action is set.
* Clicking the browser "Back" and "Refresh" buttons may not display
the correct page with respect to the Server Administrator component
tree, tabs, tab menus, or help as Server Administrator has been
designed with limited functionality to reduce overhead. Full
feature capabilities of the Web browser such as "Back", "Refresh",
and "Open in New Window" may not be supported.
* Selecting the boot sequence under the BIOS "Setup" tab does not
re-enable boot devices that have been previously disabled in