Users Guide


Physical Disk Tasks
Table A-40.PhysicalDiskTasksSupportedontheSAS5/iR,SAS6/iR,andH200Controllers

Virtual Disk Tasks
Table A-41.VirtualDiskTasksSupportedbytheSAS5/iR,SAS6/iR,andH200Controllers

Connector Task Name

SAS 5/IR

SAS 6/iR



PERC H200


Connector Rescan
No
No
No

Physical Disk Task Name

SAS 5/IR

SAS 6/iR

PERC H200
Blink/Unblink
Yes
Task only available when an enclosure or backplane and
LEDs on the physical disks are present.
Yes
Yes
Assign and Unassign
Global Hot Spare
No
Supports up to two global hot
spares
Supports up to two global hot
spares
Prepare to Remove
No
No
No
Offline
No
No
No
Online
No
No
No
Initialize
No
No
No
Rebuild
No
NA.
Rebuild automatically initiated by
the controller.
NA.
Rebuild automatically initiated by
the controller.
Cancel Rebuild
No
No
No
Remove Dead Disk
Segments
No
No
No
Format Disk
No
No
No
Clear
No
No
No
Cancel Clear
No
No
No

Virtual Disk Task Name

SAS 5/IR

SAS 6/iR

PERC H200
Assign and Unassign Dedicated Hot Spare
No
No
No
Create Virtual Disk
No
Yes
Yes
Create Virtual Disk Advanced Wizard
No
Yes
Yes
Create Virtual Disk Express Wizard
No
No
No
Rename
No
No
No
Blink/Unblink
Yes
Yes
Yes
Reconfigure
No
No
No
Change Policy
No
No
No
Split Mirror
No
No
No
Unmirror
No
No
No
Delete Last Virtual Disk
No
Yes
Yes
Delete (any) Virtual Disk
No
Yes
Yes
Check Consistency
No
No
No
Cancel Check Consistency
No
No
No
Pause Check Consistency
No
No
No
Resume Check Consistency
No
No
No
Cancel Background Initialization (BGI)
No
No
No
Format Virtual Disk
No
No
No
Cancel Format Virtual Disk
No
No
No