Users Guide

This section identifies the controller-supported features and whether or not an enclosure can be attached to the controller.
l "Controller Tasks"
l "Battery Tasks"
l "Connector Tasks"
l "Physical Disk Tasks"
l "Virtual Disk Tasks"
l "Virtual Disk Specifications"
l "Supported RAID Levels"
l "Read, Write, Cache and Disk Cache Policy"
l "Enclosure Support"
For enclosure-supported tasks, see "Enclosure and Backplane Features."

Controller Tasks
Table A-37. Controller Tasks Supported on the SAS 5/iR, SAS 6/iR, and
H200Controllers

Battery Tasks
Table A-38.BatteryTasksSupportedontheSAS5/iR,SAS6/iR,andH200Controllers

Connector Tasks
Table A-39.ConnectorTasksSupportedontheSAS5/iR,SAS6/iR,andH200Controllers

Controller Task Name

SAS 5/iR

SAS 6/iR

PERC H200
Enable Alarm
No
No
No
Disable Alarm
No
No
No
Quiet Alarm
No
No
No
Test Alarm
No
No
No
Reset configuration
No
Yes
Yes
Set Rebuild Rate
No
No
No
Set Background Initialization Rate
No
No
No
Set Check Consistency Rate
No
No
No
Set Reconstruct Rate
No
No
No
Rescan Controller
No
No
No
Create Virtual Disk
No
Yes
Yes
Export Log File
No
No
No
Clear Foreign Configuration
Yes
Yes
Yes
Import Foreign Configuration
No
Yes
Yes
Import/Recover Foreign Configuration
No
Yes
Yes
Set Patrol Read Mode
No
No
No
Start Patrol Read
No
No
No
Stop Patrol Read
No
No
No
Controller Reports
Patrol Read Report
No
No
No
Check Consistency Report
No
No
No
Slot Occupancy Report
Yes
Yes
Yes

Battery Task Name

SAS 5/iR

SAS 6/iR

PERC H200
Recondition Battery
No
No
No
Start Learn Cycle
No
No
No
Delay Learn Cycle
No
No
No