Reference Guide

Introduction 21
Server Administrator Remote Access MIB
The Server Administrator Remote Access MIB (filename dcs3rmt.mib)
provides in-band information about remote access hardware that may be
present in your system.
The Server Administrator Remote Access MIB structures its MIB objects into
groups of scalar objects or MIB tables that provide related information.
Table 1-3 describes each Server Administrator Remote Access MIB group and
lists the MIB group number assigned to the MIB group. The Server
Administrator Remote Access MIB groups are identified by the SNMP OID
1.3.6.1.4.1.674.10892.1.<MIB group number> where <MIB group number> is
the MIB group number assigned to the MIB group. See the relevant section
for more information about the MIB objects defined in a MIB group.
20 Cluster Group — defines variables for systems that operate as a
cluster
1800
21 Baseboard Management Controller Group — provides
information about the Baseboard Management Controller
(BMC) that may be present in your system. In addition to
providing general information about the BMC, this group
provides information about the serial and local area network
(LAN) interfaces of the BMC
1900
26 Traps — defines the types of alerts that can be sent to report the
status of critical components
5000
Table 1-3. Server Administrator Remote Access MIB Sections in This Guide
Section Topic MIB Group
Numbers
19 Remote Access Group — provides information about remote
access hardware that may be present in your system and defines
variables for administrative users, SNMP trap destinations,
modem configuration for dial-up networking, dial-in
configuration, and dial-out destinations
1700
Table 1-2. Server Administrator Instrumentation MIB Sections
in This Guide
(continued)
Section Topics MIB Group
Numbers