Users Guide

96 Working with Remote Access Controller
4 Configure the following details:
• Enable Serial Over LAN
•Baud Rate
• Minimum Privilege Required
5 Clic k Apply Changes.
6 Click Advanced Settings to further configure BMC.
7 In the Serial Over LAN Configuration Advanced Settings window,
you may configure the following information:
• Character Accumulate Interval
• Character Send Threshold
8 Click Apply Changes.
9 Click Go Back to Serial Over LAN Configuration to return to the Serial
Over LAN Configuration
window.
Additional Configuration for iDRAC
You can configure the IPv4 and IPv6 properties using the Additional
Configuration tab. To do this:
1
Click the Modular Enclosure → System/Server Module → Main System
Chassis/Main System
→ Remote Access object.
2 Click the Configuration tab.
3 Click Addtional Configuration.
4 Configure the IPv4 and IPv6 properties as Enabled or Disabled .
5 Click Apply Changes.
Configuring Remote Access Device Users
Remote access device users can be configured using the Remote Access page.
To access this page:
1
Click the Modular Enclosure → System/Server Module → Main System
Chassis/Main System
→ Remote Access object.
2 Click the Users tab.
The
Remote Access Users window displays information about users that
can be configured as BMC/iDRAC users.
book.book Page 96 Friday, December 4, 2009 3:20 PM