Users Guide

88 Server Administrator Services
Web Server
Subtabs: Properties | X.509 Certificate
Under the Web Server tab, you can:
• Set DSM SA Connection Service preferences. See "Dell Systems
Management Server Administration Connection Service and
Security Setup" for instructions on configuring your server preferences.
• Configure the SMTP server address and Bind IP address in
the IPv6 addressing mode.
• Perform X.509 certificate management by generating a new
X.509 certificate, reusing an existing X.509 certificate, or importing a root
certificate or certificate chain from a Certification Authority (CA).
For more information about certificate management, see "X.509
Certificate Management."
Server Administrator
Click the Server Administrator object to enable or disable access to users with
User or Power User privileges and to configure the SNMP root password.
The Server Administrator object action window can have the following tab,
depending on the user's group privileges: Preferences.
Preferences
Subtabs: Access Configuration | SNMP Configuration
Under the Preferences tab, you can:
• Enable or disable access to users with User or Power User privileges.
• Configure the SNMP root password.
NOTE: The default SNMP configuration user is root and the password
is
calvin.
•Configure the SNMP Set Operations.
NOTE: After configuring SNMP Set Operations, services must be restarted for the
change to take effect. On systems running supported Microsoft Windows operating
systems, the Windows SNMP Service must be restarted. On systems running
supported Red Hat Enterprise Linux and SUSE Linux Enterprise Server operating
systems, Server Administrator services must be restarted by running the
srvadmin-services.sh
restart command.
book.book Page 88 Friday, December 4, 2009 3:20 PM