Users Guide

Server Administrator Services 83
Click Reset to Defaults to reset all the attributes to their system default
values.
Configuration
Subtabs: LAN | Serial Port | Serial Over LAN |Additional Configuration
Under the Configuration tab when BMC/iDRAC is configured, you can
configure the BMC/iDRAC on a LAN, serial port for BMC/iDRAC, and
BMC/iDRAC on a serial over LAN connection.
Under the Configuration tab, when DRAC is configured, you can:
• Configure network properties
NOTE: The Enable NIC, NIC Selection, and Encryption Key fields display only on
Dell PowerEdge x9xx systems.
Under the Additional Configuration tab you will be able to either enable or
disable IPv4/IPv6 properties.
NOTE: Enabling/disabling IPv4/IPv6 is possible only in a dual stack environment
(where both the IPv4 and IPv6 stacks are loaded).
Users
Subtab: Users
Under the Users tab, you can modify the remote access user configuration.
You can add, configure, and view information about Remote Access
Controller users.
NOTE: On the Dell PowerEdge x9xx systems:
• Ten user IDs are displayed. If a DRAC card is installed, sixteen
user IDs are displayed.
• Serial Over LAN Payload column is displayed.
Removable Flash Media
Click the Removable Flash Media object to view the health and redundancy
status of the Internal SD Modules and vFlash media. The Removable Flash
Media action window has the Properties tab.
Properties
Subtab: Information
book.book Page 83 Friday, December 4, 2009 3:20 PM