Users Guide

Server Administrator Services 81
properly. The Power Supplies object action window can have the following
tabs, depending on the user's group privileges: Properties and Alert
Management.
Properties
Subtab: Elements
Under the Properties tab, you can:
• View information about your power supply redundancy attributes.
• Check the status of individual power supply elements, including the Rated
Input Wattage and Maximum Output Wattage. The Rated Input Wattage
attribute will be displayed only on PMBus systems starting xx1x.
Alert Management
Subtabs: Alert Actions | SNMP Traps
Under the Alert Management tab, you can:
• View current alert actions settings and set the alert actions that you want
to be performed in the event that a system power returns a warning or
failure value.
• Configure Platform Event Alert destinations for IPv6 addresses.
• View current SNMP trap alert thresholds and set the alert threshold levels
for system power watts. The selected traps will be triggered if the system
generates a corresponding event at the selected severity level.
NOTE: The System Peak Power trap will generate events only for Informational
severity.
Processors
Click the Processors object to manage your system's microprocessor(s).
A processor is the primary computational chip inside a system that controls
the interpretation and execution of arithmetic and logic functions.
The Processors object action window can have the following tabs,
depending on the user's group privileges: Properties and Alert Management.
Properties
Subtab: Information
Under the Properties tab, you can view information about your system's
microprocessor(s) and access detailed capabilities and cache information.
book.book Page 81 Friday, December 4, 2009 3:20 PM