Users Guide

Server Administrator Services 79
Alert Management
Subtabs: Alert Actions | SNMP Traps
Under the Alert Management tab, you can:
• View current alert actions settings and set the alert actions that you want
to be performed in the event that a memory module returns a warning or
failure value.
• View current SNMP trap alert thresholds and set the alert threshold levels
for memory modules. The selected traps will be triggered if the system
generates a corresponding event at the selected severity level.
Network
Click the Network object to manage your system's NICs. Server Administrator
monitors the status of each NIC present in your system to ensure continuous
remote connection. The Network object action window can have the
following tab, depending on the user's group privileges: Properties.
Properties
Subtab: Information
Under the Properties tab, you can view information about the NICs installed
on your system.
NOTE: In the IPv6 Addresses section, Server Administrator will display only two
addresses, in addition to the link-local address.
Ports
Click the Ports object to manage your system's external ports.
Server Administrator monitors the status of each external port present in
your system. The Ports object action window can have the following tab,
depending on the user's group privileges: Properties.
Properties
Subtab: Information
Under the Properties tab, you can view information about your system's
internal and external ports.
Power Management
Monitoring
book.book Page 79 Friday, December 4, 2009 3:20 PM