Users Guide

32 Setup and Administration
com2sec notConfigUser default public
2
Edit this line, replacing public with the new SNMP community name.
When edited, the new line should read:
com2sec publicsec default community_name
or
com2sec notConfigUser default community_name
3
To enable SNMP configuration changes, restart the SNMP agent by
typing:
service snmpd restart
Enabling SNMP Set Operations
SNMP Set operations must be enabled on the system running Server
Administrator in order to change Server Administrator attributes using
IT Assistant.
To enable SNMP Set operations on the system running Server Administrator,
edit the SNMP agent configuration file, /etc/snmp/snmpd.conf, and perform
the following steps:
1
Find the line that reads:
access publicgroup "" any noauth exact all none
none
or
access notConfigGroup "" any noauth exact all none
none
2
Edit this line, replacing the first none with all . When edited, the new
line should read:
access publicgroup "" any noauth exact all all
none
or
access notConfigGroup "" any noauth exact all all
none
book.book Page 32 Friday, December 4, 2009 3:20 PM