Users Guide

Setup and Administration 29
The SNMP Service Properties window appears.
5 Click the Security tab to change the access rights for a community.
6 Select a community name in the Accepted Community Names list,
and click
Edit .
The
SNMP Service Configuration window appears.
7 Set the Community Rights to READ WRITE or READ CREATE ,
and click
OK .
The
SNMP Service Properties window appears.
8 Click OK to save the changes.
Configuring Your System to Send SNMP Traps to a Management Station
Server Administrator generates SNMP traps in response to changes in the
status of sensors and other monitored parameters. You must configure one or
more trap destinations on the Server Administrator system for SNMP traps to
be sent to a management station.
1
Open the Computer Management window.
2 Expand the Computer Management icon in the window, if necessary.
3 Expand the Services and Applications icon and click Services .
4 Scroll down the list of services until you find SNMP Service ,
right-click
SNMP Service , and click Properties .
The
SNMP Service Properties window appears.
5 Click the Traps tab to add a community for traps or to add a trap
destination for a trap community.
a To add a community for traps, type the community name in the
Community Name box and click Add to list , which is located next to
the
Community Name box.
b To add a trap destination for a trap community, select the community
name from the
Community Name drop-down box and click Add
under the
Trap Destinations box.
c The SNMP Service Configuration window appears.
Type in the trap destination and click
Add .
The
SNMP Service Properties window appears.
book.book Page 29 Friday, December 4, 2009 3:20 PM