User's Manual

l Assign a hot spare to the virtual disk. When a virtual disk uses a redundant RAID level, then you can assign a hot spare (backup physical disk) to
rebuild data if a physical disk in the virtual disk fails. For more information, see:
¡ "Protecting Your Virtual Disk with a Hot Spare." This section describes hot spares and includes controller-specific information.
l Perform a Check Consistency. The "Maintain Integrity of Redundant Virtual Disks" task verifies the accuracy of a virtual disk's redundant data.
l Reconfigure a Virtual Disk. You can add physical disks to a virtual disk to expand the virtual disk's capacity. You can also change RAID levels. For more
information see "Virtual Disk Task: Reconfigure (Step 1 of 3)."
Back to Contents Page
