User's Manual

What controllers do I have?
Each controller attached to the system is displayed under the Storage object in the tree view.
In addition, the Storage object's Health and Information/Configuration subtabs display information for each controller.
To identify which controllers are attached to the system:

1. Select the Storage tree view object. The Health subtab displays the name and status for each controller attached to the system.

2. Click the Information/Configuration subtab to display additional information for each controller.

3. To display more information about a particular controller including its tasks, click the controller's name in the Name column on the
Information/Configuration subtab. This action displays the controller's Information/Configuration subtab. The Information/Configuration subtab displays
information about the controller's components and enables you to execute the controller tasks.

Related information:
l "Controllers"
l "Controller Health"
l "Controller Properties and Tasks"
How do I turn off an alarm?
Some storage components have alarms to indicate error conditions. The following describes how to turn off an alarm after it is sounding:
l "Quiet Alarm (Controller)"
l "Disable Alarm (Controller)"
l "Disable Alarm (Enclosure)"
What RAID level is best for me?
See "Choosing RAID Levels and Concatenation" and "Comparing RAID Level and Concatenation Performance" for more information.
Back to Contents Page
