User's Manual


Enclosure Tasks
Do the following to execute a drop-down menu enclosure task:

1. Expand the Storage tree object to display the controller objects.

2. Expand a controller object.

3. Expand a Connector object.

4. Select the enclosure object.

5. Select the Information/Configuration subtab.

6. Select a task from the Available Tasks drop-down menu.

7. Click Execute.

Drop-down Menu Enclosure Tasks:
l "Enable Alarm (Enclosure)"
l "Disable Alarm (Enclosure)"
l "Set Asset Data"
l "Blink"
l "Set Temperature Probe Values"

Enable Alarm (Enclosure)

Does my enclosure support this feature? See "Supported Features."
Use the Enable Alarm task to enable the enclosure alarm. When enabled, the audible alarm sounds whenever the fault LED lights. This may occur to signal
events such as:
l The enclosure temperature has exceeded the warning threshold.
l A power supply, fan, or enclosure management module (EMM) has failed.
l The split bus is not installed. (A split bus is indicated by a single triangle symbol on the back of the enclosure.)

Disable Alarm (Enclosure)

Does my enclosure support this feature? See "Supported Features."
Use the Disable Alarm task to disable the enclosure alarm. When disabled, the alarm does not sound when the enclosure exceeds a warning threshold for
temperature or experiences other error conditions such as a failed fan, power supply, or controller. If the alarm is already sounding, you can turn it off with
this task.

Set Asset Data

Does my enclosure support this feature? See "Supported Features."
Use the Set Asset Data task to specify the enclosure's asset tag and asset name. See "Set Asset Data" for more information.

Blink
Enclosure Part
Number
This property displays the part number of the enclosure.
Enclosure Alarm
This property displays whether the enclosure's alarm is enabled or disabled.